Cable Prep SCPT-TXFF-6 Flex Feeder Drop Cable Stripper, RG6/59

Cable Prep SCPT-TXFF-6 Flex Feeder Drop Cable Stripper, RG6/59

Cable Prep RBC-1100 GRAY CPT/SCPT Replacement Blade, 1 Each

Cable Prep RBC-1100 GRAY CPT/SCPT Replacement Blade, 1 Each

Cable Prep RBC-6590 BLACK CPT/SCPT Replacement Blade, 1 Each

The Cable Prep® RBC-6590 BLACK replacement blade cartridge works with the yellow CPT-series and Super CPT-series coax cable strippers on RG6 and RG59 cable. It cuts braid and dielectric to .25" (6.4mm) and exposes the center conductor to .25" (6.4mm) minimum. The hardened, tool-steel blades ensure optimum performance over a long life. Each cartridge can prepare 2500 to 5000 cables, depending on braid coverage. The cartridge snaps easily into place.

REPLACING CARTRIDGES

The cartridge must be replaced when the blades are dull. Depending on the cable you are using, the number of cuts per blade cartridge varies. For best performance the blade should be kept free of any debris or floodant residue. If you see that the cut is not as clean, the braid is straggled, or the tool takes more revolutions to cut - REPLACE THE CARTRIDGE IMMEDIATELY.

HOW TO REPLACE THE CARTRIDGE

While holding the tool, depress the lever and grasp the cartridge on both sides. Then pull cartridge straight down and out. Reverse this process for cartridge installation and then snap the cartridge in place. Move fingers away from cartridge and let go of lever.

Replacement Blade Cartridge

Cable
Type
Braid
Exposure
inch (mm)
Center
Conductor
Exposure
CPT
Part
Number
Cartridge
Part
Number
Cartridge
Part
Number
RG6
RG59
0.250"
 (6.4 mm).
0.250" min
(6.4 mm) min.
304X525
CPT-6590S.
304X520
RBC-6590
Pk/1.
304X610
RBC-6590
Pk/10.


WARRANTY
All Cable Prep brand tools are warranted to be free from defects in workmanship and material.

Write Your Own Review
You're reviewing:Cable Prep RBC-6590 BLACK CPT/SCPT Replacement Blade, 1 Each