The PulseTech™ SP-7-OBD-T SolarPulse 7-Watt Temporary Solar Charger (mfg SKU # 735X700) restores and maintains the normal loss of 12V lead-acid battery power on outdoor vehicles and equipment. This temporary solar charger can be installed and removed in minutes. It connects directly to the OBD port. Four suction cups attach the solar panel to the vehicles hood, roof or fender. The solar panel replaces the power loss from electrical accessories that occurs in seldom or erratically used outdoor vehicles even when the ignition is switched off. Pulse Technology reverses sulfate crystal buildup on the battery plates. By keeping battery plates clean, batteries recharge faster, accept a full charge and work at maximum power.
The SP-7-OBD-T solar panel can be used on a single 12-volt battery or two 12-volt batteries connected in parallel. It is a higher watt version of the SP-5-OBD-T SolarPulse 12V Temporary Solar Charger, 5W.
Name: SP-7-OBD-T SolarPulse Temporary Solar Charger, 7-Watt Part Number: 906X635 Model Name: SP-7-OBD-T
Output Electrical Output Current: 450 mA Output Voltage, Bulk Charge: 16.5 V dc
Mechanical/Physical Characteristics Solar Panel Dimensions: 10.25''L x 8.85''W x 0.25''H Circuit Box Dimensions: 3.4” L x 2.4” W x 1.5” H Weight: 2.4lbs Shipping Weight: 3lbs Box to Lug Wire Length: 3' Box to Panel Wire Length: 17' Quick Disconnect Between Solar Panel & Circuit Box
Environmental Operating Temperature: 0° F to 130° F (-18° C to 54° C) Storage Temperature: 0° F to 150° F (-18° C to 66° C)
Indicators Red LED shines steady in full sunlight and dims in partial light