Fluke 789 Process Meter, Fluke Connect Compatible
The Fluke® 789 Process Meter is the Fluke Connect™ compatible ultimate loop calibration digital multimeter with built-in, selectable 250 ohm HART resistor and 24 V loop power supply. It features a large dual display with two levels of backlighting, 1200 ohm drive capability on mA source and 0-100% mA span check buttons to toggle between 4 and 20 mA. The Fluke process meter offers diode test, resistance beeper and current adjustment modes: manual and automatic. Use the precision 1000 V, 440 mA True RMS multimeter to measure AC/DC volts and current, resistance, continuity and frequency in Min/ Max/ Average/ Hold/ Relative modes. The infrared I/0 serial port is compatible with FlukeView Forms (V2.1) software.
The 789 process meter includes TL71 premium test lead set, alligator clips, 4 x AA alkaline batteries (installed) and user's manual.
Add the ir3000 FC connector (045x967, sold separately) to the Fluke 789 and get all the benefits of the Fluke Connect app.
The Fluke 789 Process Meter combines the functionality of a loop calibrator with the power of a digital multimeter. It is compatible with the Fluke Connect™, the wireless test and measurement system, featuring TrendIt™ graphs to show changes in measurements, EquipmentLog™ history, ShareLive™ video calls to share measurements instantly with your team, AutoRecord™ measurements and Fluke Cloud™ storage.
The precision 1000-V, 440-mA digital multimeter is designed to meet 1000-V IEC 1010 CAT III standards. It features 24-V loop power supply, HART mode setting with loop power (adds selectable 250 ohm resistor), 1200 ohm drive capability on mA source and 0-100% mA span check buttons to toggle between 4 and 20 mA. Use it to measure AC and DC volts with 0.05% accuracy. The process meter provides simultaneous mA and % of scale readout, True RMS AC voltage measurement and frequency measurement to 20 kHz. It offers 20-mA DC current source/loop calibrator/simulator. You also get manual step (100%, 25%, coarse and fine) plus auto step and auto ramp. The display is double the size and twice as bright with two levels of backlighting for easy reading in the worst lighting conditions. The tester provides voltage overload protection on V, ohms, frequency and mA (backed-up by 440 mA 1000 V fuse). Externally accessible fuses and battery can be easily replaced.
