AFL OFI-400HP Optical Fiber Identifier for High Power
The AFL OFI-400HP Optical Fiber Identifier with set reference feature is used to detect signals transmitted specifically through single mode fiber where high optical power levels are present. This includes fibers carrying a single high power signal, CWDM or DWDM signals with high total power levels, amplified optical signals, or pump lasers associated with EDFA or Raman amplifiers. Easily detect power signal levels +33 to -40 dBm (@1550nm, 3mm fiber) by clamping onto the fiber to create a macro-bend which allows a small amount of light to safely escape for analysis. Technical personnel are able to identify a specific fiber without risk of accidental disruption of revenue service.
The AFL (Noyes) OFI-400HP fiber identifier comes with 2-AAA batteries, a user guide and carry case. Unit weighs 6-ounces and measures 8.5" x 1.5" x 1.1". Five year product warranty through AFL. Three year recommended calibration interval.
OFI-400HP Key Specifications:
- Insertion Loss: 0.5dB @ 1310 nm
- Detection Sensitivity: -40 dBm @ 1550 nm, 3 mm fiber
- Power Measurement: +33 to -40 dBm @ 1550 nm, 3 mm fiber
A unique two-position head is configured to work with 250- and 900-µm coated fiber, 3-mm jacketed fiber cable or ribbon fiber in seconds. No optical plunger swapping or adjustments are required when testing different fiber types. Measure fiber core or relative power on a backlit LCD during installation, maintenance, rerouting or restoration. Optical fiber identifier will detect traffic, CW and 270, 330, 1000 and 2000Hz tones. If power levels rise above 23dBm a warning message illuminates the LDC display.
