Cementex ND716-CG-SD Insulated Skinny Nut Driver, 3 x 7/16''

The Cementex ND716-CG-SD is a 7/16" double-insulated nut driver with 1/4" square drive that meets ATT-TP-76300, B1.3.3 requirements. This skinny nut driver is for use where standard insulated tools are too large, such as in high capacity, demark type fuse panels and some newer BDFB's. It is tested to 10,000 volts and rated for use up to 1000 volts AC and 1500 volts DC. It has a 3" long shaft, a cushion grip handle and a skinny head diameter of .645" with insulation for fitting AT&T terminal blocks. The nut driver can break loose the nut on the terminal block, and allow the worker to start the nut to a snug setting before adding a torque wrench to lock the terminal block nut down to AT&T torque settings. Overall length is 8.25".

Optional accessory Cementex 38F14M socket adapter, our stock number 278X980, to change nutdriver to 3/8".